Senior Rides (Jorgeusbikers): wheel set

Thursday, March 25, 2021

Challenges with my Carbon Fiber wheelset

Wheels of Happiness

Rizal Philippines

3.25.2021

I have troubles with my Bora carbon fiber wheel set. The bearings are toast and I have to replace this. There is a humming sound when free wheeling. The mechanic confirmed this. I have to find out the bearing number.

The other one is the rim is worn out. I used the wrong brake pad and the pad has eaten into the rim. It is good that there is someone in a town that specializes in carbon wheel repair. I hope he can do the job.

Sunday, September 18, 2016

Gerry Cataps wrecked wheel set repaired for lower price than the damages he asked from tricycle owner

Wheels of Happiness

Rizal Philippines
September 18, 2016

The wrecked wheel set

Ang nakabangga

Gerry C rode with us today, with the repaired wheelset. It was wrecked about two weeks ago in ride to Majayjay: a tricycle bumped him from behind in Namay, Morong Rizal. He was thrown several feet away but his RD and rear wheel were wrecked. I estimated for the investigator that the damage was P30t. Before they departed, Gerry lowered the damage to P5t. Later on when they settled, Gerry accepted only P4t for the damages. Sa awa sa Ms. who works in the munisipyo.

Today I learned that he spent only P700 for the repair. Edward of Muzon did the repair. I suppose Gerry must return the P3,000 to the tricycle driver if he is truly kind?

Or the rest should compensate him for the pain and anguish he suffered.

Sunday, June 19, 2016

Project Bianchi

Wheels of Happiness

Rizal Philippines
June 19, 2016

I did not have this plan. But Reymond who got the Orbea carbon fiber frame at Fairview (from Armand) for P13,500, offered me the newly acquired Bianchi alum frame he just got from Jr, (a racer rider from 711). So I reluctantly got it under an instalment plan (two gives ang nangyari 2 +3 in 4 days ha6)

Bianchi is a well known Italian bike and was made famous by Tour riders who liked Bianchi. It is still a famous brand and Bianchi Infinito full carbon would set you back by 2,200 pounds Bianchi has 100 years of tradition.

I took inventory of what I had: two Sora brakes on stationery trainer, two Ultegra STI, two Ultegra brakes, FD Ultegra, RD Ultegra, two Campagnolo wheel set with 105 hubs 9 speed, one 12 to 28 ten speed cogs. I lacked rhe tires and interior and the crankset. The crankset I had were 3 x 10 and a Durace 8 speed old crank. So will not do.

Problems:

1. The 105 hub/freewheel is only 9 speed. I tried putting the cogs which are ten speed and they fitted (puwede pala). The mechanics and the publications/you tube says it can do. Problem solved

2. The Campagnolo was put in storage because Pres. Luis said that using this is dangerous. But I measured the thickness of the edges and they were still about 2.5 mm and there were no cracks nor defect. So I could be used again. Problem solved.

3. The cranks and the tires. For the crank, my mind was debating based on the offerings posted:

1. Gossamer FSA for P1,800. But I found it weighed 800 grams +

2. Ultegra 10 speed 50 34 P4,900 without bottom bracket. The owner said it is supposed to be light very light being made from titanium. But the weight winnie says that Shimano cranks are heavy. The ultegra cranks weigh almost 800 grams.

3. 50 34 or 53 39

You can buy a 50 34 crank with 110 bcd and can be fitted with a 52 outer ring. (That means you still have to buy a 52 crank

The 50 34 is being junked by many puriut racer becasue at 100 rpm, the 50 ring can only do 50 kph and spin out. The 53 can reach 53 +.

Since this will be for road ride only I opted for the 53 39.

My choice was FSA K force carbon and would be supposed to weigh only 660 grams.

4. Tires.

A Panaracer would cost about P850; a Maxxis tire would set you back by P1,200. The high end Conti would be between P1,800 to P2,200 a piece. The Conti tires are light, easy to install and sevice when you have a flat, and long lasting. The 2nd hand Conti I had is more than 2 years old. The Panaracer would last about 6 months tops. So Conti more expensive tires make sense.

I saw a post by Wilson bike parts which is only P2,700 a pair. I got the Conti GP from Germnay. Each tire would weigh only about 150 grams

Thus I started assembling this last Thursday and finished Friday. I tried it Friday pm but the Conti tube had a leak. I realized it had bleb from whence the leak occured. It had a bleb. Made in China.

The finished bike