S works carbon frame, venge vias bike was a least preferred bike because of many challenges: weak brakes, untrued wheels, noisy hubs Non functioning sti and RD
I held the bike since 2016 and was a Peter Sagan model.
However I strived hard to make this A-1
1. To align the wheel, I researched YT and had 5.5 socket wrench sanded out to be a tool to align the
Cosmic wheel set. No one dared touch the alignment because there was no tool. With the tool, it be-
came an ordinary alignment job. Cheap. No need to bring this to Greenhill's.
2. I had new tires 25mm fitted;
3. For the SRAM red STI i tried to get BN 10 speed STI. Fortunately Mario Toledo repaired the broken barrel drum and found the problem to kinked cables which he replaced
4. As for the crank, disassembled this, cleaned regreased this. However the crank bolt kept coming off
A stronger push on the 14 mm made sure it would not get loose again
5. Centered the V brake and had a barrel adjuster for the rear brake to get this finely adjusted
6. Disassembled the rear hub repaired the pawls, regreased the bearing and oiled the pawls. Spent some time perfecting the pre load and centering the wheel in the bike
But finally got things right. It now runs as smooth as a better. And is equal to or better than Pinarello
No comments:
Post a Comment