Important things to remember in rd and hub assembly disassembly

Wheels of Happiness

When I diassembled the rd and hub  of the TI mtb, this post forgot certain key points:

1.   For the RD: (Deore XT 8000) no clutch

     1.   When you reinstall the rd, there is a stopper that must be at the bottom and the rid cage must slant 180% not 90 degrees.  When I did not observe this the consequences were:

           1.  The central pulley bumps into the chain stay and the 11 cog dfoes not shift;

           2.  The limit screw does not work,

           3.   You cant remove the ws assembly

 2.  For the RD again   When reassembling the spring assembly, you must turn the cage 180 degrees.   Watch the YT video well, adn you can clear the cable attachment by playing with the parallelogram.  It may look like an impossible puzzle to you (but that is whre thinking out of the box in space topology works)

  2.   The axle lentgth  -  It must be longer at the non drive side and not at the drive side, otherwise, again, you cant shift properly nor get the WS out