Pages

Wednesday, May 1, 2024

Constant repairs, upgrade on S works now makes it a darling bike

Wheels of Happiness

S works carbon frame, venge vias bike was a least preferred bike because of many challenges:   weak brakes, untrued wheels, noisy hubs  Non functioning sti and RD

I held the bike since 2016 and was a Peter Sagan model.

However I strived hard to make this A-1

1.  To align the wheel, I researched YT and had 5.5 socket wrench sanded out to be a tool to align the
      Cosmic wheel set.  No one dared touch the alignment because there was no tool.  With the tool, it be-
      came an ordinary alignment job.  Cheap.  No need to bring this to Greenhill's.

2.  I had new tires 25mm fitted;

3.  For the  SRAM red STI i tried to get BN 10 speed STI.  Fortunately Mario Toledo repaired the broken barrel drum and found the problem to kinked cables which he replaced

4.  As for the crank, disassembled this, cleaned  regreased this.  However the crank bolt kept coming off
     A stronger push on the 14 mm made sure it would not get loose again

5.  Centered the V brake and had a barrel adjuster for the rear brake to get this finely adjusted

6.  Disassembled  the rear hub repaired the pawls, regreased the bearing and oiled the pawls.  Spent             some  time perfecting the pre load and centering the wheel in the bike

But finally got things right.  It now runs as smooth as a better.  And is equal to or better than Pinarello 

No comments:

Post a Comment